CANTOL INC -- FOAM-OFF  -- 7930-00N084094
<pre>=====================  Product Identification  =====================

Product ID:FOAM-OFF
MSDS Date:10/14/1993
FSC:7930
NIIN:00N084094
=== Responsible Party ===
Company Name:CANTOL INC
Address:2211 NORTH AMERICAN ST
City:PHILADELPHIA
State:PA
ZIP:19133
Country:US
Info Phone Num:215-425-1966
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:RICHARD J PETSCHE
CAGE:HO278
=== Contractor Identification ===
Company Name:CANTOL INC
Address:2211 NORTH AMERICAN ST
Box:City:PHILADELPHIA
State:PA
ZIP:19133
Country:US
Phone:215-425-1966
CAGE:HO278
Company Name:CANTOL,INC.
Address:2211 NORTH AMERICAN STREET
Box:City:PHILADELPHIA
State:PA
ZIP:19133-3306
Country:US
Phone:215-425-1966
CAGE:58380

=============  Composition/Information on Ingredients  =============

Ingred Name:GLYCOLIC ACID; (HYDROXYACETIC ACID)
CAS:79-14-1
RTECS #:MC5250000
Fraction by Wt: >1%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:CITRIC ACID
CAS:77-92-9
RTECS #:GE7350000
Fraction by Wt: >1%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SULFAMIC ACID
CAS:5329-14-6
RTECS #:WO5950000
Fraction by Wt: >1%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:1-OCTONESULFONATE, SODIUM SALT; (SODIUM 1-OCTANE SULFONATE)
CAS:5324-84-5
Fraction by Wt: >1%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: CAUSES IRRITATION. SKIN:
    CAUSES IRRITATION. INGESTION: HARMFUL IF SWALLOWED. INHALATION: IF
    NOT USED AS A FOAM, AN IRRITATING MIST MAY RESULT. CHRONIC: NONE
    SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:EYES: IRRITATION, REDNESS, PAIN. SKIN:
    IRRITATION, REDNESS. INGESTION: IRRITATION OF THE DIGESTIVE TRACT.
    INHALATION: MIST IS IRRITATING TO MUCOUS MEMBRANES.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:EYES: IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT
    LEAST 15 MINUTES. SEEK PROMPT MEDICAL ATTENTION. SKIN: FLUSH WITH
    WATER. INGESTION: DRINK LARGE QUANTITIES OF WATER.	CALL A
    PHYSICIAN. INHALAT ION: REMOVE TO FREHS AIR.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE BY TCC
Extinguishing Media:WATER, DRY CHEMICAL, FOAM, CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . CONTAINS ACID. WATER SOLUTION IS STRONGLY ACIDIC.
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. SOAK UP SPILLS WITH OIL
    ABSORBANT. FLUSH ANY RESIDUE WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONTACT WITH SKIN & EYES. KEEP
    FROM FREEZING. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:FOR INDUSTRIAL AND INSTITUTIONAL USE ONLY. READ AND
    FOLLOW ALL LABEL DIRECTIONS AND PRECAUTIONS BEFORE USING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE - USE WITH ADEQUATE VENTILATION. NIOSH
    APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST NORMAL VENTILATION.
Protective Gloves:RUBBER, NEOPRENE, PLASTIC GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Vapor Density:>1
Spec Gravity:1.06 (H*2O = 1)
Evaporation Rate &amp; Reference:>1 (BUTYL ACETATE = 1)
Solubility in Water:COMPLETE
Appearance and Odor:LIGHT AMBER LIQUID WITH A MILD ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ALKALI, OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:BURNING MAY YIELD SULFUR DIOXIDE,
    HYDROGEN SULFIDE, AMMONIA GAS, SULFUR TRIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF USED ABSORBANT IN PROPER RECEPTACLE
    FOR LANDFILL. DISPOSE OF LIQUID AS HAZARDOUS WASTE IN ACCORDANCE
    WITH EPA- RCRA (PH<2) AND IN ACCORDANCE WITH FEDERAL, STATE AND
    LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.